Energy-autonomous Embedded Sensors?

Thanks to research undertaken by the Fraunhofer Institute, aircraft maintenance could be easier in future, with sensors monitoring the aircraft skin. If these sensors detect any dents or cracks they send a radio message to a monitoring unit.

The key?  The energy needed for this action will be obtained from temperature difference.

If a bird collides with a plane the consequences can be fatal, says a report on a web site called Engineerlive.com.  It's fatal not only for the creature itself. The impact can deform the structure of the aircraft fuselage, causing stresses in the material that can later cause cracks.

In the future, sensors in the aircraft skin will detect such damage at an early stage and simplify maintenance and repair work. The sensors are light and they do not need any cables or batteries. They draw their energy from the temperature difference between the outside air (about -20 to -50 degrees C) and the passenger cabin (about 20 degrees C). Because there are no batteries to change, the sensors can be located at inaccessible places on the aircraft.

Embedded sensors are all the rage these days, with even the esteemed analyst institution Gartner Group naming them to the Top 10 Technologies of 2012.  There are many practical applications for embedded sensors, real time aircraft monitoring is certainly one of them. 

The development consortium  EADS Innovation Works heads the development consortium. Researchers at the Fraunhofer Institute for Physical Measurement Techniques (IPM) in Freiburg, Germany, are developing the energy supply system for the sensors.

Dr Dirk Ebling, a scientist at the IPM, says: "We use thermoelectric generators, developed in co-operation with Micropelt GmbH, and adapt them so that they work efficiently." Thermoelectric materials are semiconductors that generate electric power under the influence of a temperature difference. If a number of these thermoelectric elements are connected in series, enough energy is produced to power small sensors as well as a radio device transmitting the measurement results to a central unit.

Energy-autonomous sensors  These researchers are also optimising the heat flow. A key question is how to couple the thermoelectric generator to the warm and cold environments so that it transports enough heat. To obtain the answer the scientists set up a climate chamber in which the temperature profile of the aircraft fuselage is simulated. The first optimised prototypes have already been built. Development of a prototype of the entire system including the sensor, thermoelectric generator, energy storage device, charging electronics and signal transmission module is scheduled for completion in about three years' time, hopefully enabling the system to enter series production.

The applications for energy-autonomous sensors are numerous. In automobiles they could help to reduce weight by removing the need for heavy cable assemblies. They could also be useful in old buildings, where they could be easily affixed to walls to monitor dampness, for example. Their use in the medical sector is feasible too, or a sensor system integrated in a running shirt could monitor an athlete's pulse during training, and hearing aids could obtain their energy from body heat.


Read more of this fascinating story on Engineer Live.
Kathleen Hurley